The Palm Beach Teak Outdoor Lounge Chair is our newest addition to our signature classics. This outdoor teak lounge chair has a rounded back, and a vertically woven all-weather rope.
It's designed with a low seat cushion with a knife-edge back. . . Show More
The Palm Beach Teak Outdoor Lounge Chair is our newest addition to our signature classics. This outdoor teak lounge chair has a rounded back, and a vertically woven all-weather rope.
It's designed with a low seat cushion with a knife-edge back pillow on a supportive slatted suspension. There is a single leg at the adds style and interest, echoing the tripod construction of the collection’s chairs. Palm Beach's frame is made of solid teak, if left untreated it will naturally weathers to a silver-gray color.
Palm Beach Teak Outdoor Lounge Chair has a width of 31.5", depth of 33.5", height of 30.9", seat height of 17.2", and an arm height of 30.9"
Palm Beach Teak Outdoor Lounge Chair is also available in swivel style.
Materials
Teak furniture is made from 100% sustainably sourced Indonesian teak, purchased through legally harvested channels in Indonesia. Our Natural Teak finish is untreated teak, highlighting the beauty of the premium grade logs we source for our production. This swatch is indicative of the tonality of the wood when it first is unboxed, but may vary slightly due to the organic nature of the wood. As Teak lives in the sun, moisture and elements, it will naturally begin to get a silver–grey coloration which will increase in patina over time. This is part of the beauty of teak and does not sacrifice the durability or life. If the original natural color is desired, there are cleaning, sanding and oiling methods to bring it back to it’s original coloration. Weather Cover also are suggested to slow down this process and keep your furniture in it’s best condition.
- Fabric: Copacabana / Panama / Altona / Marley / Monterey / Pebble / Stirling
Features
- Concealed teak slatting.
- 1 seat cushion and 1 knife–edge back cushion included.
- Resistant to outdoor mildew, stains and fading.
- Seat cushion features velcro straps to properly secure to the frame.
- Quick dry flow–through foam seat cushion features a Dacron wrap for sink–in comfort.
- Back cushion is filled with Dacron.
- Stitch type is single exposed.
- Our custom outdoor covers are strongly recommended as an extra layer of protection against the elements and natural aging
- If the furniture will remain covered and not used frequently, we recommend periodically taking off the covers to allow moisture and humidity to dissipate from inside allowing the furniture to breathe. This helps reduce trapped humidity if the furniture is not regularly used.
Measurement
- Width: 31.5"
- Depth: 33.5"
- Height: 30.6"
- Seat Height: 17.2"
- Arm Height: 30.9"
Care + Maintenance
Natural Teak
-
Maintain the original quality of the teak by applying Teak Cleaner at the beginning and end of each season.
-
To keep the surfaces clean from dirt, mold and mildew, periodically hose with water and Teak Cleaner, scrubbing in the directions of the grain.
-
For stubborn areas, use a power washer to clean. Hold the power washer approximately 30” away from the furniture and do not exceed 1200 PSI. Rinse and then allow to sun dry.
-
Exposure to moisture over time can raise the wood grain.
- A light sanding with fine 120-grit sandpaper smooths the surface.
Outdoor Upholstery And Inserts
- To prevent embedded dirt stains, use a soft-bristle brush to frequently dust and remove dirt from the fabric.
For everyday stains:
- Use a mild cleaner with warm water or Fabric Cleaner and a soft-bristle brush and rinse thoroughly.
- Tip cushions on their sides with the zipper facing down and unzipped to ensure that all water drains.
- Once completely dry, apply cushion covers and follow our tips below to repel dirt and moisture.
For mold and mildew:
- Soak in a 1:20 solution of bleach to water and wash with diluted dishwashing liquid and rinse thoroughly.
- A power washing with a pressure of 1200 PSI is highly effective – anything more will damage the fibers. Hold the power washer approximately 30” away from the cushion to wash away mold and mildew. • Tip cushions on their sides with the zipper facing down and unzipped to ensure that all water drains. For teak wood oil surfacing: oils released from natural teak can be removed from cushions by gently washing with Fabric Cleaner and either a power washer (1200 PSI) or a soft-bristle brush.
- To avoid oil surfacing on dining chair cushions, flip cushions up when not in use until oil surfacing subsides.
- Set-in stains and mildew may require professional cleaning.
Show Less
